CNC Fabrication Stage 1.5 Injectors 160-180CC/30%

$2,295.00



Size
Core Charge

CNC Fabrication Stage 1.5 Injectors 160CC-180CC/30%


CALIFORNIA CARB NOTICE - NOT FOR SALE OR USE IN CALIFORNIA - WEBSITE WILL NOT PROCESS 

Shipping: **LEAD TIMES VARY DEPENDING ON WORKLOAD**


Features:

  • Great for towing, or just wanting a mild power increase
  • New nozzles
  • New Tungsten Coated Plungers and Barrels
  • New o-rings
  • New springs
  • Better than OE specifications
  • We do NOT use shims, these injectors are machined to set proper armature clearance
  • Each set of injectors will come with flow sheet test results
  • Tested on the newest Hartridge flow bench using the latest injector technology


Warranty:

Covered by CNC Fabrication's limited lifetime warranty.  Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed.  Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc.  Warranties are non-transferable, and only offered to the original purchaser.

 

If you have any questions regarding tune selection or descriptions, please refer to this order page. (Click Here)

Recently Viewed Products

Customer Reviews

Overall rating: 5.0 / 5 from 5 reviews.

Shipping was extremely quick and very well packaged. Truck runs extremely well now and tunes are very on point. Would definitely recommend to any 7.3 owner out there wanting to get alittle more power out of their truck but still remain reliable. For any future needs for my truck this will be the place I come to.

CNC Fabrication Stage 1.5 Injectors 160-180CC/30%

Injectors arrived very quickly and packaged well. Working on the install now along with a lot of other major upgrades. Hopefully everything will get the truck up to modern diesel truck power levels!

CNC Fabrication Stage 1.5 Injectors 160-180CC/30%

Installed these injectors on my 2001 7.3 after mine went out at 453k miles. Totally wakes the truck up and has a lot more pick up. Install is straight forward if you’re mechanically inclined. Truck is running like brand new. Thanks CNC Fab and JeliBuilt. Tunes are awesome and couldn’t be happier

CNC Fabrication Stage 1.5 Injectors 160-180CC/30%

I have a 2003 7.3 power stroke. I did the 180/30 nozzle. I’ve been using the stroke for work going from Panama City to Saint Augustine every day for the last month and a half. I love the power increase as well as keeping the reliability, it has really woke up this truck. I’ve also done the stage two CNC high pressure oil pump they pair well together I would highly recommend the set up

CNC Fabrication Stage 1.5 Injectors 160-180CC/30%