Stage 2 Gen 2 KC300x 63/73 - 7.3 Powerstroke (Early 99)

$1,240.00

  • Brand: KC Turbo
  • Availability: In Stock
Turbine Housing
Turbo Cover
I understand that I have selected a Early 1999 product and it will not fit on a L99-2003

KC300x Stage 2 E99

Gen 2

Supports: Up to 205cc/30% injectors

 

Features & Details: 

  • 100% drop in turbo (no modifications required)
  • 63mm 7x7 SXE style compressor wheel with extended tip technology
  • 73mm SXE style turbine wheel
  • 4" ported compressor housing with drilled anti-surge for high flow
  • High Flow Non-EBPV outlet flange
  • Adjustable Wastegate Actuator for increased boost control
  • Upgraded 360 Thrust Journal Bearing Design
  • Comes with all gaskets and o-rings to install
  • Comes with new 4" intake boot

 

Description:

Improve your 7.3 Powerstroke engine's performance with the KC300x Stage 2 63/73 Gen 2 Turbo. This turbo features a 4" ported housing with drilled anti-surge for better flow, a 63mm 7x7 SXE style compressor wheel with extended tip technology, and a 73mm SXE style turbine wheel. The KC300x is a reliable journal bearing drop in turbo perfect for increasing your 7.3 Powerstroke's performance. 

This turbo will surprise you at how much it will wake up your 7.3! We have torture tested it for longevity, proven its capability on the dyno, and at the Race Track. For dedicated tow rigs and daily drivers, the .84 A/R Housing provides a quicker spool and cooler EGT's below 3000 RPMs.

 

**We Highly Recommend adding these products for best results:**

  1. Upgrading your up-pipes
  2. Upgrading Pedestal
  3. Running a PHP Hydra

 

**EXHAUST BRAKES:  We get asked a lot about exhaust brakes and if they work with our turbos.  We have found that some brands have clearance issues and might cause the brake to hinder performance, rub the turbine wheel, or cause other issues.  These brakes typically use some sort of flapper to close which causes extreme exhaust back pressure to aide in braking.  This can be hard on a turbo and motor and is not recommended.  It will be up to the customer to verify fitment and functionality.**