CNC Fabrication Stage 2 HPOP - 7.3 Powerstroke (1994.5-2003)

$1,109.95


Brand: CNC Fab

Year

CNC Fabrication Stage 2 High Pressure Oil Pump (HPOP) - 7.3 Powerstroke

If you're running bigger hybrids or just want the 7.3 to snap to attention, this is the pump. CNC Fab's in-house swash housing upgrade pushes this Stage 2 to about 30% more flow than a brand-new Bosch 99.5-03 pump. That's plenty of volume to hold 250/100 hybrid injectors, and CNC has data logged one of these on their own drag truck running 250/200 injectors, holding 3000+ psi at 40-45% duty cycle all season.

It's built best for 230-250cc 100% nozzle hybrids, but it also wakes up stock injectors with better throttle response. Results in a hot or race tune can vary with injector builder and the condition of your high pressure oil system o-rings, and anything bigger than 250cc will likely need a larger pump setup.

Pick the right one for your year: 1996-2003 trucks get PN 424018. 1994.5-1995 trucks get PN 424016, built for the early trucks' different front engine cover with the anti-drain back in the pump.

Features & Details:

  • 96-03 (PN 424018) and 94.5-95 (PN 424016): Same Stage 2 flow, built for each year's housing
  • More Volume: About 30% more flow than a new 99.5-03 stock pump
  • Injector Support: Stock up to 250cc hybrid injectors
  • In-House Swash Housing: Improved volume and fitment
  • Steel Thread Inserts: Reinforced outlet ports to prevent thread pull-out
  • Bench Tested: Flow test sheet included with every pump
  • Fresh Seals: New Viton O-rings and a new mounting gasket installed
  • Warranty: 1-year unlimited mileage

What's Included:

  • Rebuilt Stage 2 HPOP
  • New mounting gasket
  • New Viton O-rings
  • Flow bench test results

Note: HPOP line fittings are not included. Reuse your existing fittings or order them separately.

Injector Compatibility

Works with: Stock to 250cc injectors, best matched to 230-250cc 100% nozzle hybrids

Not for: Injectors larger than 250cc, which will likely need a larger pump setup

Core Charge

The price includes a $300 refundable core charge. Once your old pump is returned, the $300 is refunded. 94.5-95 cores need to be the correct early housing to get full credit.

Recently Viewed Products

Customer Reviews

Overall rating: 5.0 / 5 from 12 reviews.

Customer video review of CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP

I have a 2003 Ford F250 super 7.3 diesel I installed the CNC stage two high-pressure oil pump with stock injectors for now this pump is I would very much recommend it really woke up the truck. This thing has nonstop. Pulling power now.

CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP

Customer photo review of CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP

Pretty straightforward install and helps a lot if you already had done an e-fuel setup It came straight from them and the packaging was really good I even reused it to ship my old one back.

CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP

I emailed Brian to see what pump would Best fit my needs with the set up and tunes he had provided. I didn’t want to go to a dual pump set up so he recommended the CNC and it literally woke my truck up and runs the way it should. Packaging was excellent and well protected and The part came in days after Ordering

CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP