FASS TS F15 140G 140GPH Titanium Signature Series Fuel System Excursion 7.3/6.0

$824.00


Brand: FASS

This is the Excursion-specific version of the FASS 140 GPH Titanium Signature Series. It has the same pump and filtration as the F14 kit we sell for Super Duty pickups, but it's set up for the Excursion's chassis and tank. It's good for up to about 600 hp.

The kit comes with FASS's billet 6061-T6 bulkhead/suction tube, which gives you a 5/8" pickup and a 1/2" return in one fitting. That means no cutting into the filler neck. The PTFE pickup tube trims to your tank depth, and when it's set up right you can run down to about 1/8 tank. Everything that makes the Titanium Signature Series our go-to: FASS Whisper Technology keeps pump noise way down, radiused internal passages keep air from getting whipped back into the fuel, and the Mass Flow Return design sends unused fuel back to the tank after it's been filtered, so the fuel in your system is always being cleaned. It mounts on machined steel brackets that use your factory bed bolt, so there's no drilling or welding on the frame to hang the pump.

What You Get

  • FASS Titanium Signature Series 140GPH pump and filter assembly
  • Billet bulkhead fitting with PTFE suction tube
  • Fuel lines, fittings and bolt-on mounting brackets

Specs

  • Flow: 140 GPH
  • Fuel pressure: preset 60-65 PSI
  • Power support: up to about 600 hp
  • 1,000,000-mile-rated motor
  • Filtration: FASS PF-3001 particulate filter + XWS-3002 water separator (FASS rates it at 2 micron)
  • Built-in air/vapor separation
  • About 30,000-mile filter service life
  • 1/2" fuel lines and ports
  • Optional port for an electric heater and a fuel pressure gauge
  • Limited lifetime manufacturer warranty

Fitment

  • 2000-2003 Ford Excursion 7.3L Powerstroke (also fits 2003-2005 Excursion 6.0L)
  • Build level: stock to moderate

Recently Viewed Products