FASS ND TS F14 140G 140GPH No-Drop Titanium Signature Series Fuel System & Sump 7.3/6.0

$864.00


Brand: FASS

If you want a FASS on your 7.3 without dropping the tank, this is the kit. The FASS No-Drop Titanium Signature Series 140GPH puts out 140 gallons per hour at a preset 60-65 PSI, enough for builds up to roughly 700 hp, and it comes with the fuel sump in the box. It's a good fit for a stock truck through a moderately built one.

The No-Drop kit bundles FASS's single-bolt fuel sump with the system, so you pick up fuel from the bottom of the tank with a big reservoir bowl that keeps the pump fed when fuel sloshes on a low tank. As the name says, you don't have to drop the tank to install it, and buying it as a kit costs less than getting the system and sump separately. Everything that makes the Titanium Signature Series our go-to: FASS Whisper Technology keeps pump noise way down, radiused internal passages keep air from getting whipped back into the fuel, and the Mass Flow Return design sends unused fuel back to the tank after it's been filtered, so the fuel in your system is always being cleaned. It mounts on machined steel brackets that use your factory bed bolt, so there's no drilling or welding on the frame to hang the pump.

What You Get

  • FASS Titanium Signature Series 140GPH pump and filter assembly
  • FASS single-bolt fuel tank sump (extra-deep bowl)
  • Fuel lines, fittings and bolt-on mounting brackets
  • Mounting bracket included, plus everything else needed for a complete install

Specs

  • Flow: 140 GPH
  • Fuel pressure: preset 60-65 PSI
  • Power support: up to about 700 hp
  • Filtration: FASS PF-3001 particulate filter + XWS-3002 water separator (FASS rates it at 2 micron)
  • Built-in air/vapor separation
  • About 30,000-mile filter service life
  • 1/2" fuel lines and ports
  • Optional port for an electric heater and a fuel pressure gauge
  • Limited lifetime manufacturer warranty

Fitment

  • 1999-2003 Ford F-250/F-350 Super Duty 7.3L Powerstroke (also fits 2003-2007 6.0L)
  • Build level: stock to moderate

Good to Know

  • The sump goes into the bottom of the factory tank. No tank drop is needed, but plan on cutting the tank for the sump opening. Follow FASS's sump instructions.

Recently Viewed Products