JeliBuilt Custom Tuning for Hydra – JeliBuilt Performance, LLC

Hydra Chip With JeliBuilt Custom Tunes - Modified Injectors


Add Gauge Pod Selector Switch

7.3L Hydra Package - Modified Injectors

This package includes 6 custom tunes by JeliBuilt Performance pre-loaded on a brand new Power Hungry Performance Hydra Chip. Our custom tuning is written for your particular modifications, such as, injectors, turbocharger, high pressure oil pump, transmission, axle gear and tire size etc. For optimal performance and drivability, these tunes utilize the MAP sensor, therefore a Boost Fooler is highly recommended.

Brian Jelich has been tuning the 7.3 Powerstroke since 2010 and perfecting the art of custom tuning to match each truck specifically. Whether you are looking for better towing or all out performance, we have you covered. JeliBuilt custom tuning takes it to the next level, tuning the most powerful and quickest trucks in the nation. Any questions in regards to ordering, please refer to the section at the bottom. 



  • Hydra includes the chip, digital switch, ribbon cable, and USB cable and 6 pre-loaded custom calibrations from JeliBuilt
  • 15 total positions available
  • Built-in Module Bypass (for diagnostics or emissions testing) and No-Start
  • Easy to read digital display switch that mounts on any flat surface for maximum convenience
  • Program/reprogram the chip using the optional USB extension cable and bracket
  • Emailed calibrations for order rearrangement later
  • Free USB extension cable
  • Fully compatible with PATS-equipped vehicles
  • Update and Reprogram ONLINE with Hydraflash
  • PHP standard calibrations offered online
  • Fully compatible with PATS-equipped vehicles


Modified Stock

Low power calibration with transmission tuning.  

Hi Idle

You pick the RPM. 

Tow Performance

This is a Tow Tune with a little kick, higher shift points, and pressure. Ideal for light to moderate loads.

Strenuous Tow

For the heavier loads. Optimized fuel and ICP control. Transmission tuning is heavily modified. 

Daily Driver

Just a good all around street tune with pep. 

Quiet Mode

For those times you just want to turn the volume down on your engine. Designed for Drive Thru's and idling only.

Eco Mileage

Trying to get the best mileage out of your rig?

Hot Street 

Just starting to turn up the heat. This is a fun tune to drive on.

Extreme Street

More aggressive than the Hot Street. 

Drag Ripper 

Highest powered file we offer. Good for eating up the competition.

Drag Ripper NOS

For Nitrous Oxide Injection - Conservative version of Drag Ripper

Sled Pull

High power file for sled pulling. 1st & 4th Gear Delete (For Low Range Only) option available upon request.


High power file without the typical downshift problem in overdrive.

Cobra Jet ~ Lope

Idles like your granddaddy's 429CI Ford

**Unlimited Revisions for 30 Days**


Need Help?


How to find your PCM code (AKA Box Code): The Box code is the code located on the outside of the ECM which identifies the calibration that was originally programmed into the PCM when the vehicle was manufactured and shipped. The code will be on the white label affixed to connector side of the PCM. There are a few tricks to retrieve it without having to remove the PCM. On the engine compartment side,  take a camera phone and reach down and snap a picture. The label faces the driver's side fender. The video on the very bottom of this page will go into detail if you have any questions. 

Order Form: On the order form, basically just fill out to the best of your knowledge under each section. If it is unknown, state "unknown". If it's stock, state "stock". 



Tags: obs