{"product_id":"fass-nd-tsp-f14-140g-140gph-no-drop-titanium-signature-series-plus-fuel-system-sump-7-3-6-0","title":"FASS ND TSP F14 140G 140GPH No-Drop Titanium Signature Series Plus Fuel System \u0026 Sump 7.3\/6.0","description":"\u003cp\u003eThis is the No-Drop kit with the Plus treatment. You get FASS's 140 GPH Titanium Signature Series Plus at a preset 60-65 PSI with the fuel sump included, so you can install it without dropping the tank. It's rated for stock up to about 700 hp.\u003c\/p\u003e\u003cp\u003eThe Plus version steps up the hardware: O-ring boss (ORB) fittings, black anodized 6061 aluminum fittings, black fuel line for a clean look under the truck, and a black anodized aluminum heat sink on the motor that FASS says runs it up to 20°F cooler. The No-Drop kit bundles FASS's single-bolt fuel sump with the system, so you pick up fuel from the bottom of the tank with a big reservoir bowl that keeps the pump fed when fuel sloshes on a low tank. As the name says, you don't have to drop the tank to install it, and buying it as a kit costs less than getting the system and sump separately. Everything that makes the Titanium Signature Series our go-to: FASS Whisper Technology keeps pump noise way down, radiused internal passages keep air from getting whipped back into the fuel, and the Mass Flow Return design sends unused fuel back to the tank after it's been filtered, so the fuel in your system is always being cleaned. It mounts on machined steel brackets that use your factory bed bolt, so there's no drilling or welding on the frame to hang the pump.\u003c\/p\u003e\u003ch3\u003eWhat You Get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFASS Titanium Signature Series Plus 140GPH pump and filter assembly with motor heat sink\u003c\/li\u003e\n\u003cli\u003eFASS single-bolt fuel tank sump\u003c\/li\u003e\n\u003cli\u003eBlack fuel line, black anodized ORB fittings and bolt-on brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlow: 140 GPH\u003c\/li\u003e\n\u003cli\u003eFuel pressure: preset 60-65 PSI\u003c\/li\u003e\n\u003cli\u003ePower support: stock to about 700 hp\u003c\/li\u003e\n\u003cli\u003eFiltration: FASS PF-3001 particulate filter + XWS-3002 water separator (FASS rates it at 2 micron)\u003c\/li\u003e\n\u003cli\u003eBuilt-in air\/vapor separation\u003c\/li\u003e\n\u003cli\u003eAbout 30,000-mile filter service life\u003c\/li\u003e\n\u003cli\u003e1\/2\" fuel lines and ports\u003c\/li\u003e\n\u003cli\u003eOptional port for an electric heater and a fuel pressure gauge\u003c\/li\u003e\n\u003cli\u003eLimited lifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1999-2003 Ford F-250\/F-350 Super Duty 7.3L Powerstroke (also fits 2003-2007 6.0L)\u003c\/li\u003e\n\u003cli\u003eBuild level: stock to moderate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to Know\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThe sump goes into the bottom of the factory tank. No tank drop is needed, but plan on cutting the tank for the sump opening. Follow FASS's sump instructions.\u003c\/li\u003e\u003c\/ul\u003e","brand":"FASS","offers":[{"title":"Default Title","offer_id":71595077435645,"sku":"NDTSPF14180F140G","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2092\/7085\/files\/NDTSPF14180F140G.jpg?v=1792256757","url":"https:\/\/www.jelibuiltperformance.com\/products\/fass-nd-tsp-f14-140g-140gph-no-drop-titanium-signature-series-plus-fuel-system-sump-7-3-6-0","provider":"JeliBuilt Performance, LLC","version":"1.0","type":"link"}